Design,synthesis, and evaluation of 6-carboxyalkyl and 6-phosphonoxyalkyl derivatives of 7-oxo-8-ribitylaminolumazines as inhibitors of riboflavin synthase and lumazine synthase

A series of 6-carboxyalkyl and 6-phosphonoxyalkyl derivatives of 7-oxo-8-D-ribityllumazine were synthesized as inhibitors of both Escherichia coli riboflavin synthase and Bacillus subtilis lumazine synthase. The compounds were designed to bind to both the ribitylpurine binding site and the phosphate binding site of lumazine synthase. In the carboxyalkyl series, maximum activity against both enzymes was observed with the 3'-carboxypropyl compound 22. Lengthening or shortening the chain linking the carboxyl group to the lumazine by one carbon resulted in decreased activity. In the phosphonoxyalkyl series, the 3'-phosphonoxypropyl compound 33 was more potent than the 4'-phosphonoxybutyl derivative 39 against lumazine synthase, but it was less potent against riboflavin synthase. Molecular modeling suggested that the terminal carboxyl group of 6-(3'-carboxypropyl)-7-oxo-8-D-ribityllumazine (22) may bind to the side chains of Arg127 and Lys135 of the enzyme. A hypothetical molecular model was also constructed for the binding of 6-(2'-carboxyethyl)-7-oxolumazine (15) in the active site of E. coli riboflavin synthase, which demonstrated that the active site could readily accommodate two molecules of the inhibitor.     

Palladium-catalyzed amination of aryl halides on solid support

[reaction: see text] The first examples of the Pd(0)-catalyzed amination of aryl halides using Rink-resins as nitrogen source are described. Pd(2)dba(3)/BINAP/NaO-t-Bu was found to be the most efficient catalyst/base system, while a solvent mixture of dioxane and tert-butyl alcohol was shown to enhance the selectivity toward the desired monoarylation. Moderate to good yields and excellent purities of the amination products were found with electron-poor aryl halides, while electon-rich aryl halides failed to react under these conditions.     

Use of solid-phase microextraction-capillary-gas chromatography (SPME-CGC) for the varietal characterization of wines by means of chemometrical methods

The extraction of wine aroma compounds was studied by direct-SPME (DI/SPME), headspace-SPME (HS/SPME) and multiple-headspace-extraction-SPME (MHE/SPME). The aromagrams obtained by HS/SPME-CGC were evaluated with chemometrical methods for the varietal classification of wines. Received: 25 July 1997 / Revised: 24 September 1997 / Accepted: 7 October 1997     

Deprotonierte Dithiocarbaminsäureester als Thiolat-S-Donor-Liganden. Strukturen von Ph(H)NC(S)SMe,Co(PhNC(S)SMe)3 und Cu6(PhNC(S)SMe)6

Deprotonated Dithiocarbamic Acid Esters as Thiolate S-Donor Ligands. Structures of Ph(H)NC(S)SMe, Co(PhNC(S)SMe)₃, and Cu₆(PhNC(S)SMe)₆ The reaction of N-phenyl-S-methyldithiocarbamate, PhN(H)C(?S)SMe, ( 1 ) with cobalt(II) and copper(II) salts yields the monomeric compound Co^III(PhNC(S)SMe)₃ ( 2 ) and the hexameric compound Cu₆^I(PhNC(S)SMe)₆ ( 3 ). These complexes contain the negatively charged imino-thiolate ligand PhN?C(? S)SMe, which has been formed by deprotonation of 1 . The crystal structures of 1 – 3 have been determined. 1 forms centrosymmetrical dimers through N? H …? S bridge bonds, the conformation in the solid state and in solution is Z,E′. Co^III shows in 2 a trigonal-antiprismatic coordination, with the ligands acting as N,S-chelates. 3 contains an octahedral Cu₆-core with Cu …? Cu-distances ranging from 276.3(5) to 305.7(4) pm. Each copper center is trigonally coordinated to one nitrogen and two sulfur atoms of three different ligands. Crystal data: 1 , triclinic, space group P1 , a = 590.5(6), b = 869.0(1), c = 968.5(9) pm, α = 67.29(8), β = 78.44(8), γ = 81.64(9)°, Z = 2, 1 775 reflections, R(R_w) = 0.0317(0.032). 2 , orthorhombic, space group Pbca, a = 978.0(2), b = 1 842.9(4), c = 3 059.7(6) pm, Z = 8, 1 129 reflections, R(R_w) = 0.0997(0.0886). 3 , monoclinic, space group P2₁/c, a = 1 363.1(3), b = 1 342.8(3), c = 1 671.9(3) pm, β = 103.48°, Z = 2, 1 374 reflections, R(R_w) = 0.0708(0.0617).     

The Fermi doublet V2−V3 + V4 of CH3CN as a probe of molecular interactions

The Fermi doublet V₂?V₃ + V₄ of CH₃CN in basic, inert and acidic solvents has been studied by IR and Raman spectroscopy. The values of W, the Fermi coupling coefficient, obtained from IR spectra varies with the nature of the solvent while W evaluated from Raman data remains constant at 12.5 ± 0.5 cm^?1. The similar effects of Bronsted and Lewis acids on the band frequencies and intensities is evidence that the CN group complexes with acids via the N atom “n” electron pair and not the π bond.     

On the reaction of isothiosemicarbazides with heterocumulenes. Part I

Isothiosemicarbazides 2 react with acyl isothiocyanates under addition-cyclization to yield 1,3,4-thiadiazoline-2-imines 3 as well as the isomeric 2-amino-substituted 1,3,4-thiadiazolium-5-acylaminides 3′ . In a similar manner the 2-hydrazino-substituted 1,3-thiazoline 4 adds ethoxycarbonyl isothiocyanate to give the thiosemicarbazide 5 , which undergoes a rearrangement to the 1,3,4-thiadiazoline-2-imine 5′. The [2+2] cycloreversion of 3d involving ethoxycarbonyl iso(thio)cyanate and the thermal induced Dimroth rearrangement of 3′f and h are also discussed.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Nucleophilic Addition of CH, NH, and OH Bonds to the Phosphadiazonium Cation and Interpretation of (31)P Chemical Shifts at Dicoordinate Phosphorus Centers

The phosphadiazonium cation [MesNP](+) reacts quantitatively with the fluorenylide anion, MesNH(2), and MesOH (Mes = 2,4,6-tri-tert-butylphenyl), resulting in formal insertion of the N-P moiety into the H-Y (Y = C, N, O) bonds. Specifically, reaction of MesNPCl with fluorenyllithium gives the aminofluorenylidenephosphine [crystal data: C(31)H(38)NP, monoclinic, P2(1)/c, a = 9.568(8) ?, b = 24.25(2) ?, c = 11.77(1) ?, beta = 101.38(8) degrees, Z = 4]. Similarly, reaction of [MesNP][GaCl(4)] with MesNH(2) gives the diaminophosphenium salt [MesN(H)PN(H)Mes][GaCl(4)] [crystal data: C(36)H(60)Cl(4)GaN(2)P, monoclinic, C2/c, a = 24.921(2) ?, b = 10.198(4) ?, c = 16.445(2) ?, beta = 93.32(1) degrees, Z = 4], and reaction with MesOH gives the first example of an aminooxyphosphenium salt [MesN(H)POMes][GaCl(4)]. It is proposed that the reactions involve nucleophilic attack at phosphorus followed by a 1,3-hydrogen migration from Y to N. Experimental evidence for the formation of sigma-complex intermediates is provided by the isolation of [MesNP-PPh(3)][SO(3)CF(3)] [crystal data: C(37)H(44)F(3)NO(3)P(2)S, triclinic, P&onemacr;, a = 10.663(1) ?, b = 19.439(1) ?, c = 10.502(1) ?, alpha = 103.100(7) degrees, beta = 113.311(7) degrees, gamma = 93.401(7) degrees, Z = 2]. As part of the unequivocal characterization of the aminooxyphosphenium salt, detailed solid-state (31)P NMR studies and GIAO calculations on the phosphenium cations have been performed. Contrary to popular belief, the phosphorus shielding in dicoordinate cations is not caused by the positive charge but results from efficient mixing between the phosphorus lone pair and pi orbitals.